Table of Contents
Advertisement
Parts and their functions
26. Call switch [CALL]
This is pressed to call the camera.
While it is held down, the lamp of the camera's call switch
lights.
If the call switch on the camera has been pressed, the
lamp of this switch lights and the buzzer sounds.
(When the ON has been selected as the buzzer setting
on page22)
Lighted: This indicates that the camera's call switch
has been pressed.
Off:
This indicates that the camera's call switch
has not been pressed.
27. Auto iris switch [AUTO]
This is used to activate the auto iris function.
Lighted: The auto iris mode is established.
Off:
The lens iris is controlled by the iris rotary
encoder.
28. Iris coarse switch [COARSE]
This is used to change the variable range of the iris in
respect of the displacement in the iris rotary encoder.
Lighted: The changes in the iris in respect of the
displacement in the iris rotary encoder are
increased.
Off:
The changes in the iris in respect of the
displacement in the iris rotary encoder are
reduced.
29. Lens IRIS storage switch [MEMO]
This is used to register the iris control values in the
memory.
(Fine adjustments can be performed while the active
switch LED is lighted.)
30. Lens IRIS call switch [RECALL]
This is used to call the iris rotary encoder information
stored in the memory.
(Fine adjustments can be performed while the active
switch LED is lighted.)
31. Lens shrinker display [50.8]
Lens extender display [LENS EXT]
This lights to warn that the setting of the lens extender is
other than 15.
Lighted: The setting of the lens extender is other than
15.
Off:
This indicates that the lens extender is not
being used or that the extender function is
not available.
Note
With AK-HC3800, the lens shrinker display [x0.8]
LED does not light.
32. Iris f-number indicator
This indicates the lens f-number.
33. Iris rotary encoder [IRIS]
This is used to adjust the iris level of the lens.
When the auto iris mode is not established:
The iris can be adjusted manually.
When the auto iris mode is established:
The iris level is adjusted automatically.
This control enables the auto iris level to be finely
adjusted.
(Fine adjustments can be performed while the active
switch LED is lighted.)
34. Active switch [ACTIVE]
When this is pressed during the iris and the master
pedestal control function priority display, the iris and the
master pedestal function priority changes, and the lamp
of the switch lights. When the ACTIVE switch on the ROP
is pressed, the iris priority is transferred to the ROP.
35. Master pedestal storage switch [MEMO]
This is used to store the master pedestal rotary encoder
information in the memory.
Fine adjustments can be performed while the active
switch LED is lighted.
36. Master pedestal call file switch [RECALL]
This is used to call the master pedestal rotary encoder
information stored in the memory.
Fine adjustments can be performed while the active
switch LED is lighted.
37. Master pedestal rotary encoder [M-PED]
This is used to adjust the master pedestal level.
The level is increased by rotating the control clockwise.
Fine adjustments can be performed while the active
switch LED is lighted.
29
Advertisement
Table of Contents
