Operation; Starting The Trimmer - Toro PowerPlex Series Operator's Manual

Operation

Starting the Trimmer

1. Make sure that the vents on the trimmer are
clear of any dust and debris.
1. Trimmer venting areas
2. Align the cavity in the battery pack with the
tongue on the handle housing
3. Push the battery pack into the handle until the
battery locks into the latch
1. Battery latch
4. To start the trimmer, press the lockout button,
then squeeze the variable-speed trigger
9).
1. Lockout button
Figure 7
(Figure 8).
(Figure 8).
Figure 8
Figure 9
2. Variable-speed trigger
Shutting Off the Trimmer
To shut off the trimmer, release the trigger.
Whenever you are not using the trimmer or are
transporting the trimmer to or from the work area,
remove the battery pack.
Removing the Battery Pack
from the Trimmer
Press the battery latch on the machine to release the
battery pack and slide the battery pack out of the
machine (Figure
g194612
1. Battery latch
g189881
(Figure
g189886
11
10).
Figure 10
g192774