Filter Care; Using The Vacuum; Dry Vacuum Cleaning - Porter-Cable PCC795 Instruction Manual

English
Fig. C
16
7
To remove the battery pack from the tool, press the release
button 17 and firmly pull the battery pack out of the tool
handle. Insert it into the charger as described in the charger
section of this manual.
Proper Hand Position

WARNING:
personal injury, ALWAYS hold securely in anticipation of
a sudden reaction.
Proper hand position requires one hand on the main
handle 2 .

Using the Vacuum

On / Off Switch (Fig. D)
1. Attach the appropriate accessory to the hose
2. Insert battery pack.
3. To turn vacuum on, press the I/O (on/off) button
Fig. D
ON position OFF position

Dry Vacuum Cleaning

To empty tank (FIG. E)
The sound of the motor changes and suction is reduced
when the tank is full.
1. Turn vacuum off. Remove the battery pack.
2. Unlatch tank latches
the tank.
3. Empty contents of tank into suitable container.
4. Clean or change filter
manual.
5. Inspect vacuum for damage by foreign objects. Contact
the nearest PORTER-CABLE authorized service center for
replacement of damaged or missing parts.
6. Replace power head
securely.
8
17
To reduce the risk of serious
8
and remove power head from
5
. See Filter section of this
18
onto the tank and latch
3 5
Fig. E
5
Wet Vacuum Cleaning

WARNING:
shock. Do not expose to rain. Store indoors.

CAUTION:
If vacuum has liquid in the tank it may spill out from the
exhaust port.

CAUTION:
terminals are dry and clean before installing battery
pack.
The filter must be removed before using the vacuum to
.
clean liquids. See Filter section of this manual.
To empty tank
.
1
The sound of the motor changes and suction is reduced
when the tank is full.
1. Turn vacuum off. Remove the battery pack.
2. Unlatch tank latches
the tank.
3. Empty contents of tank.
4. Inspect vacuum for damage by foreign objects. Contact
the nearest PORTER-CABLE authorized service center for
replacement of damaged or missing parts.
5. Dry inside of power head and tank with a clean cloth.
6. Replace power head
Filter

Filter care

The wet/dry filter
life filter. To be effective in minimizing dust recirculation the
filters MUST be installed correctly and in good condition.
nOTE: A clean filter is the most important factor in the
operation and efficiency of any vacuum. If the filter becomes
clogged beyond cleaning, damaged, or fails to operate
properly, replace only with a reccommended replacement
filter.
TO CLEAN OR CHANGE THE FILTER (Fig. F)
1. Turn vacuum off. Remove the battery pack.
2. Unlatch the tank latches
head from the tank as shown in figure E. Unlock the
filter lock
filter 18
To reduce the risk of electric
Do not tilt vacuum when in use.
Ensure battery port and
and remove power head from
5
onto the tank
3
18 included with this vacuum is a long
5 and remove the power
19 by twisting it counter clockwise. Pull the
out to remove it from the power head.
3
18
5
and latch securely.
5