Reader Setting Values And Defaults - Biomark HPR Lite User Manual

7 Reader Setting Values and Defaults

Setting Setting Name
Number
1 Reader ID
2 Unit Name
3 Language
4 Timestamp Format
5 Tag Format
6 Temperature Unit
7 Power Saving Mode
8 Auto Shutdown Time
9 Backlight Time
10 Storage Mode
11 Vibration Enable
12 Beeper Enable
13 Bluetooth Enable
14 Bluetooth Authentication
15 Bluetooth Connection Mode
16 Bluetooth Remote Address
17 Bluetooth Password
Description
Defines the reader ID
(2 HEX characters)
Defines the unit name that is used as
Bluetooth discoverable name
Defines the reader interface language
Defines the date format for
timestamping
Defines the tag ID display format
Defines the BioTherm13 tag
temperature display unit
Reduces antenna power output by 50%
Defines the time before the reader
automatically powers off
Defines the time before the backlight is
turned off
Defines the tag IDs storage mode
Enables/Disables the vibration
Enables/Disables the beeper
Enables/Disables the Bluetooth
Enables/Disables the Bluetooth
Authentication
Defines whether the reader operates in
Slave (discoverable and connectable)
or Master mode (automatically connect
to a known device)
Defines the Bluetooth address to
connect in Master mode to
Defines the PIN code for the Bluetooth
Authentication
www.biomark.com
Factory Default Configurable Values
Value
01 2 HEX characters
"HPR-Lite_xxxx" Up to 16 alphanumeric
("xxxx" is the reader
1 (English)
2 (MDY)
1 (HEX)
2 (F)
No
180 0-7200 (seconds)
20 1-7200 (seconds)
3 (On Unique)
Yes
Yes
Yes
Yes
1 (Slave)
00:00:00:00:00:00
1234 Up to 16 alphanumeric
00-FF
characters
1=English
2=French
3=Spanish
4=Portuguese
1=DMY
2=MDY
3=ISO 8601
1=DEC
2=HEX
1="C"
2="F"
0=No
1=Yes
1=No storage
2=On All
3=On Unique
0=No
1=Yes
0=No
1=Yes
0=No
1=Yes
0=No
1=Yes
1=Slave
2=Master
6 bytes
characters