QUICK START GUIDE
HPR LITE
READER
Overview
For detailed instructions about the Biomark
Lite Reader
features and operation, please
download the complete HPR Lite Reader User
Manual from our website at:
https://www.biomark.com/hpr-lite-reader
Downloads & Help Section
Charging the Reader
The reader is charged by using the supplied Micro
USB cable plugged into either a computer USB
port or the provided AC power adapter.
HPR Lite reader needs to be fully charged before
first use.
Powering the Reader On
To power the reader on, press and hold the
center OK button. After ~1.5 seconds the main
screen will be displayed.
Powering the Reader Off
To power down the reader, press and hold
•
the OK button. Continue to hold the OK
button until the reader shuts down.
•
By default, the HPR Lite will shut down
automatically after 3 minutes of inactivity.
Pressing any button will reset this time. This
•
function will become disabled if the reader is
connected via USB cable or extended to 1
hour of inactivity if the reader is connected
via Bluetooth® while in Slave mode.
+1 208.275.0011
HPR
in the
Note: The
www.biomark.com
Need help?
Do you have a question about the HPR LITE and is the answer not in the manual?
Questions and answers