Configuring Reader; General Settings - Biomark HPR Lite User Manual

3 Configuring Reader

The Main Menu can be accessed by briefly pressing down the OK button. From here, pressing the
corresponding arrow key allows selecting the desired settings' sub-menu. When in a sub-menu, up and down
arrow keys allow scrolling through settings; pressing OK key allows changing the selected setting. To exit a
sub-menu back to the Main Menu press the left arrow key. To exit the Main Menu screen press the OK
button.

3.1 General Settings

Pressing the (Up) key while in the Main Menu screen will display the General settings menu.
This menu provides access for managing the system settings of the reader.
Parameters that can be adjusted are:
•
Vibration - Turns the internal vibration on or off.
•
Beeper - Turns the audible indicator on or off. The reader emits a beep for many different reasons,
but when disabled all instances will be silent.
•
Power Saving Mode - When enabled, antenna power output will be reduced by 50% to increase
battery life. Enabling this mode will also reduce reader performance by 15-25%.
this setting is disabled.
•
Tag format - Switches between hexadecimal (e.g. 3DD.00075BCD15) or decimal (e.g.
989.000123456789) tag ID display.
•
Temperature unit - Switches between °C or °F tag temperature display (when FDX-B
BioTherm13 temperature sensing tag is detected).
•
Date/Time - Allows setting the reader's internal clock
•
Language - Selects the language of the reader. Options are English, French, Spanish, and
Portuguese.
•
Load default settings - Will reset all options back to the factory defaults. A confirmation window
will appear asking to verify this action. If 'Yes' is pressed, the reader will automatically reset all
settings. Tag data stored in memory will not be erased.
NOTE: More settings are available though reader's USB or Bluetooth connection to a PC.
The default for this setting is English.
The default for this setting is enabled.
The default for this setting is enabled.
The default for this setting is HEX.
The default for this setting is °F.
www.biomark.com
The default for