Memory Settings - Biomark HPR Lite User Manual

3.2 Memory Settings

Pressing the (Right) key while in the Main Menu Screen will display the Memory settings menu.0
>
This menu allows you to access information within the reader's memory.
Parameters that can be adjusted are:
•
View tags - Displays the tag IDs currently stored in the reader's memory from newest to oldest.
The numbers in the parenthesis tell you which tag ID you are currently viewing out of the total
number of tag IDs stored.
•
Storage mode - Changes which detected tag IDs are stored in the memory. There are 3 possible
options:

Disabled - Disables the HPR Lite's memory. Detected tag IDs will not be stored in the
memory, but will still be transmitted via USB and Bluetooth connections. When disabled,
the counter on the main screen is replaced with an 'OFF' indication.

On All - All detected tag IDs will be stored in the memory and transmitted via USB and
Bluetooth connections. The memory counter on the main screen will increase after each
detection.

On Unique - A tag ID is stored and transmitted via USB and Bluetooth connections only
once when it is detected several times in a row. If another tag is detected after the first tag,
and the first tag is detected again, it will be read and stored again. If the reader is powered
off and on, the tag ID can be stored and transmitted again.
Memory setting.
09/27/2017 09/27/2017
3DD.00075BCD15 3DD.00075BCD15
FDX-B FDX-B
MEMORY MEMORY
09/27/2017 09/27/2017
3DD.00075BCD15 3DD.00075BCD15
FDX-B FDX-B
MEMORY MEMORY
49744 49744
See examples on page 18.
www.biomark.com
7:13 PM 7:13 PM
OFF OFF
7:13 PM 7:13 PM
On Unique is the default