Get Connected - Q-See QC8116 Quick Start Manuals

GET CONNECTED

Find the desired location for your camera to be placed. If you are going to
be mounting the camera, please use the included mounting hardware to
secure the camera firmly to the wall.
Please make sure to go through all
steps and test the system completely before mounting the cameras.
• Slide the included rubber grommet onto the antenna stem of the camera
• Screw the supplied Wi-Fi antenna on to the dome camera
• Plug in the included power supply to a surge protector and plug in the
power supply to the Wi-Fi dome camera.
You are now ready to setup the camera. Once
the camera is plugged in you may see a red LED
power indicator light up. Later when connected
to Wi-Fi this LED should turn green .
6