Table of Contents
Related Manuals for Viatran 359
Summary of Contents for Viatran 359
- Page 1 MODEL 359 SANITARY PRESSURE TRANSMITTER INSTALLATION MANUAL 199 Fire Tower Drive Tonawanda, NY 14150 Toll Free: 1-800-688-0030 International: 716-629-3800 Fax: 716-693-9162 www.viatran.com solutions@viatran.com 98MANAL359 Rev. F 3/21/17...
- Page 2 PRODUCT OVERVIEW All information contained in this document is representative of a standard Model 359. If the product you ordered has special requirements or modifications, refer to the Laser Marked information on the product and your purchase order for possible alteration to the product’s configuration.
- Page 3 5. If the transmitter must be removed for an extended period of time, a dummy plug is optionally available to seal the tank so tank or system can be put back in service. Like the Model 359, the plug is secured into the tank receiver or adapter by the retaining nut and sealed by the O- Ring.
- Page 4 Refer to the below example for field NSR calibration. NSR EXAMPLE You have Viatran’s Model 359 with a standard range of 0 to 300” WCG. You would like to set an NSR of 0 to 150” WCG. Refer to the Performance Certificate and obtain the following: Zero = 0”...
- Page 5 More continued usage would require a shorter period between calibration verification and product maintenance. If a product is perceived to be exhibiting problems, it can be returned to Viatran for analysis and/or repair. It is suggested that only Viatran personnel attempt repair of the product. Any damage resulting from customer disassembly would result in a loss of coverage under the warranty policy.
Need help?
Do you have a question about the 359 and is the answer not in the manual?
Questions and answers