Advertisement
User Manual
EASYLOG Temperature Label Series
www.e-elitech.com
Technical parameters：
◆Temperature range：-30℃～+70℃
◆Operating temperature：-30℃～+70℃
◆Accuracy：±0.5℃（-20~+40℃）;±1℃, for other range.
◆Resolution：0.1℃
◆Record cycle：6、15、30、45、60(days) selectable
◆Alarm type：Consecutive or cumulative via custom order
◆Temperature unit：Celsius or Fahrenheit
◆Alarm temperature：
1、Basic produce: 2℃~8℃（35.6℉~46.4℉）
2、General produce: 0℃~4℃ (32℉~39.2℉)
3、Meat & Dairy: -2℃~ 4℃（28.4℉~39.2℉）
4、Frozen food: -23℃~-7℃(-9.4℉~19.4℉)
5、Other temperature alarm range available via custom order
◆Record time delay：standard 30 minutes, other time configurable
◆Alarm time delay：standard 30 minutes, other time configurable
◆Report type：PC software
◆Data interface：U disk
◆Power supply：Internal CR2032 battery
◆Supported operating system：WIN XP/WIN7/WIN8 and MAC
◆Water proof level：IP67
◆Size：Length：80mm Width：48mm Height：5.8mm
Operation indication：
Start / Stop
Before start, press
button for more than 4s
After start, press button
for more than 4s / reach
record cycle
Status
Inactivated
Start delay
Activated
Stopped
LED indication
ALARM and OK lights flash in turn
ALARM and OK lights flash at the
same time
Action
Short press the button
Short press the button
Short press the button / every 1 min
Double-click button
Every 1s
Note
Start data logger
Stop data logger
LED indication
ALARM and OK lights flashes at the same time
Ok light flashes
OK light flashes(normal Temperature)
ALARM light flashes(temperature
over temperature)
Ok light flashes three times( mark set
successfully)
Alarm light flashes three times(10 times of
special event marks had been done,and the
Max time of special event marks is 10.)
OK (alarm free) or ALARM(alarm) light flashes
Advertisement
