Advertisement
Operation
.
1
0 The Gateway RCW 2000WiFi
Please follow the steps below to add and configure the gateway.
a. Match the provided two antennae with gateway's antennae ports and install them cor-
rectly.
b. Plug RCW 2000Wi-Fi into a power outlet by using the provided power cord.
c. Press the power button on the side of the gateway to turn it on.
d. Use a pin or stick to press "Reset" hole to make sure it entered configuration mode.
+
① Click "
" rst.
Device
Enter Device Name or Model
No Devices Found
Device
③ Type in device name, select
time zone and click "Add".
Add Device
564569584350391*****
2000 wifi
GMT+08:00
Add
Click the QR code on top right to automatically scan
and add.
Cancel
(GMT-08:00) Anchorage
(GMT-07:00) Los Angeles
(GMT-07:00) Tijuana
(GMT-07:00) Phoenix
+
Search
More
OK
② Click "
code on the back of the device.
Add Device
Device GUID
Device Name
GMT+08:00
Click the QR code on top right to automatically scan
and add.
④ "Added Succesfully" will shows.
Please click "OK" to continue.
Add Device
564569584350391*****
2000 wifi
GMT+08:00
Click the QR code on top right to automatically scan
and add.
Added successfully
The device scanned is a Wi-Fi device.
Would you like to set WiFi
Cancel
5
" and scan the QR
Add
Add
OK
Advertisement
