Advertisement
User Manual
EASYLOG Temperature Label Series
www.e-elitech.com
Press button and hold for 4 sec to manually stop
recording ,then tear open package and expose
the USB connector
1.Press the button for more than 4 seconds to start recording,then the two LED lights will flash in turn for
three times,which indicates a successful starting;
2.Tear off the barcode label for further use;Press the button for more than 4 seconds to stop record (if
record capacity is full, will automatically stop), then the two LED lights will flash at the same time for
three times, which indicates a successful stopping. After stop recording, the green LED light flashes
once every 1 second;Tear off the transparent plastic bag,then it will shown USB interface.
3.Inserted the EASYLOG,both red and green lights keep light which indicate function,and you can get the
report from PC software Easy-tracking.
4.EASYLOG supports special events mark function,like taking records of carriers' transfer etc.During the
running time of EASYLOG,double-licking the button and the lights will indicate mark status.(10 times
Max.)
Plug EASYLOG into USB port of
PC to download data
Advertisement
