Honeywell Limitless WGLA Series Quick Start Manual page 6

Limitless™ WGLA Series 50053338
Issue 1
1.4 WGLA Mounting
The WGLA housing has four mounting holes that will accept a M5 or #10 size screw. Two of the mounting holes
are slotted to allow adjustment of the switch actuator to the customer actuator during installation. It is suggested
that the two slotted holes have screws installed and adjustment be made before installing screws in the non-slotted
holes.
Note: The adjustment process should not allow preload of the switch actuator and the full travel of the switch
actuator should not exceed the switch over travel maximum specification. (See installation drawing at
www.honeywell.com/sensing)
Figure 7. Limitless™ WGLA mounting hole diagram
The WGLA Series switch has many actuator types and associated specifications.
Additional information can be found at: www.honeywell.com/sensing
6 Honeywell Sensing and Control