Table of Contents
Advertisement
Available languages
Available languages
Notice SecurAccess PMR
Proceed as shown below :
Setting to modify
Talk time duration
3.14. Call barring
Call barring parameters allow limiting the keypad dialing
Setting to modify
Call barring activation
er
1
not allowed first digit
nd
2
not allowed first digit
er
1
not allowed first two digits
nd
2
not allowed first two digits
rd
3
not allowed first two digits
th
4
not allowed first two digits
Limitation of digits
3.15. Changing the programming access code
Programming access code setting coming out from factory is : 0000
This code can be modified as indicated below:
Setting to modify
Changing the setting code
Your new access code :
3.16. Reset
Caution: this operation switches back the unit to all factory settings; it also erases all numbers stored
in memories. This operation can be done locally or remotely.
Local reset:
1. Open the unit and access to the PCB
2. Connect the unit to a powered telephone line.
3. Depress the RAZ button located on the PCB for at least 4 seconds (see page 5)
4. The unit starts emitting several "beep" tones during the reset
Code
Setting choice
Factory settings are shown in grey
0 7
Enter the number of minutes of talk time (from 0 up to 9).
Note : 0 = no limit (factory setting)
Code
Setting choice
Factory settings are shown in grey
8 0
0 : Deactivated (no limit)
(factory setting)
1 : Activated
8 1
Digit not allowed.
# if no digit (factory setting)
8 2
Digit not allowed.
# if no digit (factory setting)
8 3
The two digits not allowed.
## if no digit (factory setting)
8 4
The two digits not allowed.
## if no digit (factory setting)
8 5
The two digits not allowed.
## if no digit (factory setting)
8 6
The two digits not allowed.
## if no digit (factory setting)
8 7
Maximum digits allowed from 01 to 29
« ## » no limitation (factory setting)
« 00 » keypad dialing not allowed
Code
Setting choice
Factory settings are shown in grey
9 0
Enter the new 4 digits access code twice
note : 0000 = factory setting
42
Conf.
*9
Conf.
*9
*9
*9
*9
*9
*9
*9
*9
Conf.
*9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SecurAccess PMR and is the answer not in the manual?
Questions and answers