Adjusting The Speaker Settings - Sherwood Newcastle R-925 Operating Instructions Manual

Adjusting the speaker settings

Adjusting the setting of the center speaker and the
subwoofer connected.
Press the SPEAKER MODE button for more than 2
2
seconds to enter the center speaker mode.
SPEAKER
MODE
In the THEATER, HALL, STADIUM, CHURCH or
normal stereo mode, it will become the subwoofer
mode directly.
Select the desired center speaker mode.
3
SPEAKER
MODE
Each time this button is pressed, the center speaker mode
changes and flickers as follows;
LARGE : When using a relatively large center speaker.
SMALL : When using a relatively small center speaker.
NONE
: When not using a center speaker.
In the Dolby 3 Stereo mode, the NONE mode can not be
selected.
Memorize the desired center speaker mode
4
while it flickers.
MEMO / ENTER
The desired center speaker mode is memorized and
then it becomes the subwoofer mode.
If the center speaker display goes off, repeat again
from the above step 2.
Select the desired subwoofer mode.
5
Each time this button is pressed,the subwoofer
mode changes and flickers as follows;
YES : When using a subwoofer.
NO : When not using a subwoofer.
Memorize the desired subwoofer mode
6
while it flickers.
If the subwoofer display goes off, repeat again from
the above step 2.
Checking the speaker setting
Each time this button is pressed briefly, the setting
of the center speaker or the subwoofer is displayed.
14
SPEAKER
MODE
MEMO / ENTER
SPEAKER
MODE