Globalstar SmartOne Solar User Manual page 46

9100-0425-01
Appendix K - External Input Cable
INSTRUCTIONS AND WIRING DIAGRAM
INSTRUCTIONS
1. This cable is designed to work with the SmartOne Solar product only. Do not use
with any other SmartOne product.
2. This cable is designed to work with 3V logic only. Do not use with 5V logic
devices.
3. Be certain that unused wires do not short to each other.
4. All ground wires are common; therefore, any ground can be used with any
function.
Connector PIN #
2
3
4
5
8
9
11
12
19
20
SmartOne Solar™ User Guide v1.0.3
FOR EXTERNAL INPUT CABLE
(PN# 2030-0265-04)
Color Function
Green Ground
Brown Setup (Handshake from Serial Device)
Red RX (connect to Serial Device TX)
Orange TX (connect to Serial Device RX)
Light Blue Dry Contact 2
White Dry Contact 1
Yellow Soft Power Down (Normally Open)
Blue Ground
Violet Line Power + (positive)
Line Power – (negative)
Gray
Confidential & Proprietary Information
40