Site-To-Site Vpn Connectivity - NETGEAR BR500 Hardware Installation Manual

Insight Instant VPN Router BR500

Site-to-site VPN connectivity

With two routers, each at a different site, you can create a site-to-site VPN, which means
that you can connect two local LANs and separate networks together as if they were
physically connected and colocated. A VPN group that consists of two routers can
support up to 20 remote users with access to both sites. These users can access all
resources that are connected to each router, for example, file servers, ReadyNAS storage
systems, security cameras, and so on.
After each router is connected to the Internet, you can use the NETGEAR Insight app
or Insight Cloud portal to discover each router on the network and add each router to
the Insight app and Insight Cloud portal.
Note: For an Insight managed network, the VPN authentication traffic requires a
connection with the NETGEAR cloud, but the actual data is transferred between the
routers at the sites and does not go through the NETGEAR cloud.
The following figure shows two routers providing edge routing, site-to-site VPN
connectivity, and VPN connectivity for remote users.
Figure 4. Site-to-site VPN connectivity
Applications 16 Hardware Installation Guide