Programming The Master Power Key; Using The Master Power Key; Clearing The Master Power Key - Shaw ATLAS PVR Universal Remote Control User Manual

Programming the Master Power Key

1. On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2. Enter 9 9 5. The last-selected device key
blinks twice.
3. Press PWR once.
4. For the first device you want in the power on
sequence, press a device key (e.g., CBL) once.
Then press PWR once.
5. Repeat step 4 up to four more times to add the
second, third, fourth, and fifth device, as
desired.
6. To save the settings and exit the program:
Press CBL once.
a.
Press and hold SETUP until the CBL key blinks
b.
twice.

Using the Master Power Key

1. After programming, point the remote control
at the devices. Press CBL once.
Press PWR once to sequentially turn the
2.
programmed home entertainment devices on
or off.
You will see the devices turn on or off according to the
programmed sequence.

Clearing the Master Power Key

On the remote control, press and hold SETUP
1.
until the last-selected device key blinks twice.
Enter 9 9 5. The last-selected device key
2.
blinks twice.
3. Press and release the MASTER POWER key.
19