1
Meet Your Remote
TV Power
Start
Shaw / Menu
Access Guide, Saved,
Video On Demand, Apps,
Search and Settings.
Voice Remote
Setup
Program remote for Aim
Anywhere or to control your
TV or audio device.
Shaw_XR11_gb_manual_sept13.indd 1
2
Turn On Your Remote
Your remote arrives with the AA
batteries already installed, but not
activated. Here is how to power it
on for the first time.
A
Pick up your remote and remove the
"Pull" tab (on back) by pulling away
from the remote. The Status LED will
blink green four times as the remote
Mic / Status LED
powers up (about 5 seconds).
All Power
Voice Control
Push and hold to talk.
Back
Discover content by
channel, program or key
words.
B
Turn on your TV.
C
Turn on your set-top box.
Number Keys
Use predictive text (T9) to
quickly search for content.
TV Input
Changes to the next
available input on your TV
(if programmed in Step 4).
3
Pair Your Remote for
4
Control Your TVs Power and Volume
Voice Control
A
Using the list on the right, find the first
Use voice control to search for networks
5-digit code for your TV manufacturer.
and shows, set DVR recordings, and get
recommendations. See Step 5 of this
guide for examples.
A
Press and hold the Setup button (about
3 seconds) until the Status LED changes
from red to green.
B
Press and hold the Setup button (about 3
seconds) until the Status LED changes
from red to green.
B
Press the Shaw button.
C
Follow the on-screen instructions to enter
the 3-digit code that appears.
Once the code is correctly entered, your
Shaw remote is paired with the device.
C
Enter the first 5-digit code for your TV
manufacturer. The Status LED should flash
green twice.
Not working? Make sure the battery tab from
your remote is removed, your TV is on and you are
entering the correct 3-digit code on your TV screen.
D
Verify that the code was accepted by using
your remote to adjust volume and turn the
TV on and off.
5
Test Voice Control
Once your remote is paired with your set-
top box, you can use voice control.
Popular TV Manufacturer Codes
A
Press and hold the Voice button until you
Emerson
11864, 10171
hear the audio tone.
Insignia
12049, 11641
JVC
11774, 12321
LG
12731, 10178
Magnavox
10054, 12597
Panasonic
11480, 10051
Philips
11867, 12597
RCA
10047, 11447
B
Speak a voice command to the remote
while continuing to hold down the button.
Samsung
12051, 10702
Try one of the suggestions below. The
Status LED will be solid blue while you
Sanyo
10154, 11142
speak your command.
Sharp
10093, 12360
C
Release the Voice button when your
Sony
10810, 11685
command is complete. Look at the TV for
Toshiba
10156, 11524
the results of your voice command.
VIZIO
11758, 12707
Westinghouse
11712, 13579
WATCH CNBC
FIND The Voice
SHOW ME all Eagles games
If your code isn't listed or you would
SHOW ME all kids movies on HBO
like to control an audio device, visit
RECORD The Biggest Loser
urcsupport.com/shaw
KIDSZONE
GUIDE
WHAT SHOULD I WATCH?
WHAT'S ON NOW?
Not working? Try the second code listed. Still not
working? Visit
urcsupport.com/shaw
for a complete
list of codes or use the My Account app for mobile
Not working? Make sure you're pressing the
(iOS/Android) or X1.
Voice button while you speak into the remote,
and release it when complete.
Have an Audio Receiver or Sound Bar? If you would
like to setup your remote to control your audio device
or sound bar, visit
urcsupport.com/shaw
For Industry Canada
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada
Rules.Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must acceptany interference received, including
interference that may cause undesired operation.
Pour Industrie Canada
Énoncé d'Industrie Canada
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes: (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
9/16/16 12:05 PM
Need help?
Do you have a question about the XR11 and is the answer not in the manual?
Questions and answers
Why does our remote need new batteries about every 30 days? We use Duracell copper top...