Table of Contents
Advertisement
DVD Code
Device Type:___________________
AUD Code
Device Type:___________________
CBL Code
Device Type:___________________
TV Code
Device Type:___________________
PROGRAMMING TV/VCR COMBO CONTROL
If you own a TV/VCR Combo, perform the following
instructions to control this device:
1.
Turn on your TV/VCR Combo and insert a
video cassette.
2.
On the remote control, press AUX once; it will
blink once. Then press and hold SETUP until
the AUX key blinks twice.
3.
Use the "Manufacturer's Codes" starting on
page 24 to locate the brand name and enter
the first four-digit code for your TV/VCR
Combo. If you perform this procedure
correctly, the AUX key will blink twice.
NOTE:
If the AUX key did not blink twice after enter-
ing the codes last digit, repeat steps 2 through
3 and try entering the same code again.
If you've located a TV/VCR setup code that
works for your TV/VCR Combo and a separate
TV code is also listed, you'll need to program
this code into the remote control to access vol-
ume control (see "Programming Device Con-
trol" starting on page 8).
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ATLAS PVR Universal Remote Control and is the answer not in the manual?