Press a mode key twice (i.e., AUX, DVD, AUD,
2.
TV, or CBL) to clear all the learned keys for
that mode. The LED blinks twice.
3.
Repeat step 2 for another mode or press and
hold SETUP to exit programming.
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control's channel-control
capabilities are locked to the cable converter. The
affected keys
LAST. This will guarantee that you do not inadvertently
change a channel on your TV or VCR. However, you can
de-activate this feature to allow full access to these keys
in the TV and VCR modes.
*
NOTE:
This feature does not affect the AUD mode.
Unlocking Channel Control
On the remote control, press CBL once; it will
1.
blink once. Press and hold SETUP until the
CBL key blinks twice.
2.
Enter 9 7 3. The CBL key will blink twice.
Press CH- once. The CBL key will blink four
3.
times.
Now the remote control will provide TV and VCR
channel-control capabilities while in the TV or VCR
mode.
*
are 1 through 0, CH+, CH-, ENTER, and
15
Need help?
Do you have a question about the ATLAS PVR Universal Remote Control and is the answer not in the manual?