Getting Started; Installing The Battery In The Telephone; Charging Your Telephone Battery - Alcatel-Lucent 8212 User Manual

8212 DECT Handset

2 Getting started

In order to have a fully operational 8212 DECT Handset, make sure that you have the following items:

8212 DECT Handset.

2 rechargeable NiMH batteries AAA 600mAh 1,2V.

A single charger.

2.1 Installing the battery in the telephone

2.1.1 Installing the battery in the telephone:

: Push the cover towards the back of the phone until the cover
is unclipped.

: Lift up the cover.

Using the plus (+) and minus (-) guides in compartment to insert
the batteries in the proper direction. Insert the minus () end first
and push to place the battery.

: Replace the cover.

: Push the cover until the it is clipped.
2.1.2 Removing the battery from the telephone

: Push the cover towards the back of the phone until the cover
is unclipped.

: Lift up the cover.

Remove the plus (+) end first to remove the battery.


2.2 Charging your telephone battery

2.2.1 Charging the battery on a single charger
Put your phone on its support. Plug the USB cable into a 5V socket (AC/DC
adaptor, computer, ...).
The AC/DC adaptor is not provided with the set. Please contact your provider
for a recommended AC/DC adaptator.
You can configure how the handset behaves when it is installed on the charger
using the settings menu. Refer to the chapter on configuring your telephone.
8AL90328ENAAed0a
9 / 29