Table of Contents
Advertisement
location
You can locate the washing machine
anywhere (except bathrooms, showers and
away from rain, damp places and water) as
long as you have a cold water supply, drainage
and electrical connection alongside.
Ensure there is clearance each side of the
machine to allow slight side ways movement
during washing and spin drying.
Attention!
Never place your machine on a carpet. This
prevents air circulation. The electrical
components of the machine may overheat and
may cause damage.
Please ensure the power, water supplies
and waste are suitable, if in doubt, consult a
qualified plumber or electrician.
Different methods of floor construction can
result in an increase in vibration/noise during
spin modes.
If these symptoms are experienced please
ensure firstly that all four feet are in firm contact
with the floor to minimise any out of balance
vibration which may be generated.
Additional information is available by
request.
installation
Removing transport safety bolts
The transport safety bolts must be removed
before any operation of the machine.
Turn the bolt heads C anti-clockwise until
1
the bolt can be partially withdrawn.
Remove them and the rubber bushes by
2
pulling outwards. An up/down action and
a small squirt of washing up liquid will ease
removal.
Plastic plugs, supplied inside the protective
3
bag, designated P, should be placed in the
safety bolt holes as shown.
C
In addition to this, washing machines should
not be installed on carpet, foam backed
laminate, or parquet flooring where the nature
of these types of flooring can also contribute
to the inefficient operation of the washing
machine on the spin cycle.
C
Attention! Keep the safety bolts for future
transportation and reinstate them before
transporting your machine. Never transport
your machine without the transport bolts in
position. Any resultant damage is not covered
by the warranty.
5
P
Hide quick links:
Advertisement
Table of Contents
