Child Lock - Beko WMA 510 S Installation & Operating Instructions Manual

Child Lock

To prevent operation by children you may
activate child lock while the machine is in
operation.In order to activate the child lock,
press Prewash and Rinse Hold function keys
simultaneously for 3 seconds after the washing
programe has started. The prewash indicator
light will flash continously.
Start / Pause
Cancel Prewash
3h
6h
9h
Ready
Only the on/off button can be used when
child lock option is selected.
To start a new program after the program
is over or to adjust the program, child lock
should be deactivated. The child lock will be
deactivated when the same keys are pressed
together for 3 seconds and the Prewash
indicator light will go out.
Programme operation
During the machine's operation, the indicator
lights on the programme follower will light up
as each stage is reached.
Softener is added in the softener
compartment, it will be used in the last rinse
cycle.
If rinse hold is selected, you have to press
"Start/Pause/Cancel" button, to let the
programme continue.
Rinse Extra
Hold Rinse
On/Off
Wash Spin/End
Programme Follower
The relevant lamp on the program follow-
up indicator lights up according to the selected
program after the machine starts operating.
Light of the completed step goes out and the
next relevant step lights up. When the "On/Off"
button is pressed, lamp of the Ready lights up.
The "Wash" light on the program follow-up
indicator lights up when Start/Pause/Cancel
button is pressed after selecting the washing
program.
"Spin/End" indicator will light up when the
program comes to an end. For your safety,
your machine will not let you open the door
for 1 minute after the program is finished. The
"Spin/End" light will start flashing. After the
door lock is deactivated, the "Ready" and
"Spin/End" indicators will light up. You may
now open door.
You can put your machine to "Pause" mode
when the machine is working by pressing the
Start/Pause/Cancel button. "Start/Pause/Cancel"
button will light up. Some alterations in program
settings may be made in the Pause mode (See,
Changing a Program) and if "Pause" mode is
entered in an appropriate step of the program,
adding laundry function may be used (See,
Laundry adding feature).Allow 2 minutes for
the door lock to be deactivated.
Press "Start/Pause/Cancel" button again to
return to the "Wash" mode from "Pause"
mode.The "Start/Pause/Cancel" button will
light up continuously and the machine will
resume operating from the step it was paused.
Start / Pause
Cancel Prewash
Ready
10
Rinse Extra
Hold Rinse
On/Off
Wash Spin /End