End Of The Programme - Beko WMA 510 S Installation & Operating Instructions Manual

Adding Laundry
When loading laundry, make sure the
garments are unfolded and are loosely placed
in the drum. Place your knitted garments into
the machine inside out. Ensure that no clothes
are trapped between the door and the rubber
bellow when closing the door. Push the door
to close. Washing process will not start unless
the door is closed.
Re-Selection / Cancellation of
Functions After Operation Start
In order to change auxiliary functions, push
the Start/Pause/Cancel button for a short time
to pause the program. Change the auxiliary
functions allowed by the selected program.
Press the Start/Pause/Cancel button for a short
time to continue the program.

End of the programme

When the program ends " Spin/End"
indicator light will come on.The door can then
be opened after about 2 minutes and machine
is ready for next washing load. Press "On/Off"
to turn machine off.
Unloading
The machine stops automatically after
programmes have been completed.
1 In about 2 min, the door will unlock. Open
the door.
2 Press the On/Off button to switch off the
machine.
3 Unload the machine and leave the door open.
Check to see if there is any water left in the
door gasket. If so, remove with a soft cloth.
Programme Cancelling
You can select a new program and start
washing.To cancel a programme before it starts
to wash press "Start/Pause/Cancel" key for 3
seconds. "Start/Pause/Cancel" and the other
indicator lights will be off .
If the programme has started and you want
to cancel it, press Start/Pause button for 3
seconds. The programme will move to the
"spin" step and related indicator on the
programme follower will be on. Machine will
start to pump for draining and the door can
be opened after a short period of time.
11
Start / Pause Rinse Extra
Cancel Prewash Hold Rinse
Ready Wash Spin/End
On/Off