General Control - Sharp XL-3000 Operation Manual

General Control

„ To turn the power on
Press the POWER button to turn the power on.
To set the unit to stand-by mode:
Press the POWER button again.
„ To change the display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER but-
ton on the remote control.
Dimmed Brightened
„ Opening and closing the CD compartment
The CD compartment cover is motorized.
When the power is turned on, you can open or close the CD com-
partment cover by pressing the (OPEN/CLOSE) button.
Caution:
z Do not stop or move the CD compartment cover manually. It may
cause malfunctions to the unit.
z Be careful not to jam your fingers in the CD compartment cover.
15
01/1/17 XL-3000(U2)2.fm