Features; Accessories; Precautions For Use - Panasonic AK-HRP200G Operating Instructions Manual

Features

z This unit is a remote operation panel for controlling a studio handy
camera (AK-HC3800/AK-HC3500A) and a camera control unit
(AK-HCU200/AK-HCU355A). It can also control remote cameras and
camera recorders.
z A simple button layout and an IRIS control lever ensure intuitive and
stable operation.
z Scene files, user files, and lens files can be saved to a memory card.
(AK-HC3800 only)
z One CCU , remote camera
* *
1
connected via a serial connection.
*
1
Serial connection compatible CCUs: AK-HCU200/AK-HCU355A
*
2
Serial connection compatible remote cameras:
AW-HE50/AW-HE60/AW-HE120/AW-HE870/AK-HC1500/
AK-HC1800
*
3
Serial connection compatible camera recorder: AJ-PX5000

Accessories

Make sure that the following accessories are supplied.
• Be sure to appropriately dispose of the packing material when you have unpacked the product.
CD-ROM .................................................................................................... 1
• Operating Instructions <Basics>
• Operating Instructions <Operations and Settings>
• Easy IP Setup Software
• ROP Setup Software

Precautions for use

Observe the following in addition to the information included in "Read this first!".
„ Handle carefully
„
Do not drop the unit or expose it to strong impacts or vibrations. Do
not carry the unit by the iris lever. The unit could be damaged or
cause an accident.
„ Use the unit within a temperature range of 0°C to 40°C
„
(32°F to 104°F).
Exposure to temperatures below 0°C (32°F) or above 40°C (104°F)
could adversely affect Internal components.
„ Power off before connecting or disconnecting cables
„
Connect and disconnect cables when the unit is turned off (when the
CCU is off, the ROP cable is disconnected and an external DC power
supply is not connected).
„ Avoid humidity and dust
„
Avoid using the unit in an excessively humid or dusty location to
prevent damage to internal components.
„ Maintenance
„
Turn the unit off and wipe it with a dry cloth. To remove stubborn
soiling, immerse a cloth in a solution of a neutral kitchen detergent
and water, wring it out thoroughly and wipe the unit gently. Then wipe
it with a dry cloth to remove any moisture.
<Note>
• Do not use benzine, paint thinner or other volatile fluids.
• If you use a chemical cloth for cleaning, read through the
precautions before use.
„ Avoid exposure to water
„
Make sure that the unit is not directly exposed to water. Exposure to
water could damage it.
, or camera recorder can be
*
2 3
z Up to 19 CCUs , remote cameras
* 4
connected via a network hub (switching hub) (100base-TX).
*
4
IP connection compatible CCU: AK-HCU200
*
5
IP connection compatible remote cameras:
AW-HE50/AW-HE60/AW-HE120/AW-HE2
*
6
IP connection compatible camera recorder
See the Operating Instructions for the camera recorder to check
whether it is IP connection compatible.
z The supplied Easy IP Setup Software can be used to set the IP
addresses of the unit and CCUs or remote cameras.
z The supplied ROP Setup Software can be used to set the camera
connections.
„ Disposal
„
When the unit reaches the end of its service life, ask a special
contractor to dispose of it properly according to environmental
regulations.
, or camera recorders can be
* 5 * 6
7