Table of Contents
Advertisement
To configure the Device to communicate with an access point
1.
In the Mode field, select Infrastructure.
2.
In the SSID field, enter the SSID. The SSID is case sensitive and must not exceed 30
characters. This entry must be the same as the SSID set on the access point.
To configure the Device to communicate directly with other computers
3.
In the Mode field, select Ad Hoc.
4.
In the SSID field, enter the SSID. The SSID is case sensitive and must not exceed 30
characters. This SSID must be the same as the SSID assigned to all other computers in your
wireless network.
5.
Select a channel you want to use for receiving and transmitting wireless data communication.
Wireless clients using the same channel communicate with each other.
If you set the transmission rate to 1, 2, 5.5, or 11 Mbps, configure all other wireless clients in the
peer-to-peer network to use the same transmission rate.
Restore the Default Settings
To restore all values on the screen to the original default values, click Restore Defaults.
Intel® PRO/Wireless 2011B LAN USB Device Users Guide
7
Advertisement
Table of Contents
