Hardware Installation - 4IPNET WHG525 Quick Installation Manual

Hardware Installation

Please follow the following steps to install WHG525:
1. Connect the power cord to the power socket on the rear panel. The Power LED should be on to indicate a
proper connection.
2. Connect an Ethernet cable to the WAN1 Port on the front panel. Connect the other end of the Ethernet
cable to an xDSL/cable modem, or a switch/hub of an internal network. The LED of this port should be on
to indicate a proper connection.
3. Connect an Ethernet cable to the LAN Port on the front panel. Connect the other end of the Ethernet cable
to an administrator PC for configuring the system, an AP for extending wireless coverage, a switch for
connecting more wired clients, or a client PC. The LED of this LAN port should be on to indicate a proper
connection.
WHG525 Secure WLAN Controller
③
Quick Installation Guide
ENGLISH