Common Settings - 4IPNET WHG525 Quick Installation Manual

Common Settings

< Setup Wizard >
WHG525 provides a Setup Wizard for quick
configuration. To quickly configure WHG525 by
using the Setup Wizard, click on the Setup Wizard
button on the top right corner to start the
configuration process.
Step 1: General

Select an appropriate time zone from the Time
Zone drop-down list box to set up the system
time.

Click Next to continue.
WHG525 Secure WLAN Controller
Step 2: WAN1 Interface

Select a proper type of Internet connection for
WAN1 interface from the following three
available connections: Static, Dynamic, or
PPPoE. Your ISP or network administrator can
advise on the connection type available to you.
Below depicts an example for Dynamic.

Click Next to continue.
Step 3: Local User Account (Optional)
New local accounts can be created and added into
the database via this optional function. If local user
accounts are not required, click Skip to go directly to
Step 4. However, It is recommended to create at
least one local user account in order to verify the
system's readiness upon completion of this Setup
Wizard.

Enter the Username (e.g. testuser), Password
(e.g. testuser) to create a new local account.

Click Next to continue.

More local accounts can be added by clicking the
Back button in Step 4.
⑧
Quick Installation Guide
ENGLISH