4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content. All other brand and product names are claimed or registered marks of their respective companies or organizations.
ADSL Router from your ISP (Internet Service Provider). LAN1 ~ LAN6: Client machines connect to WHG801 via these LAN ports (10/100/1000 Base-T RJ-45). LED Indicators: There are four kinds of LED, WAN1, WAN2, LAN6, and LAN7, to indicate the traffic status of the SFP ports.
4. Connect an Ethernet cable to the Mgmt Port on the front panel. Connect the other end of the Ethernet cable to an administrator PC for configuring the WHG801 system, an AP for extending wireless coverage, a switch for connecting more wired clients, or a client PC. The LED of Mgmt port should be on to indicate a proper connection.
Service Zones. When needed, WHG801’s Local, Site-to-Site and Remote VPN tunnels can be used to further secure the information flows for business. Mobile workers on the road or home-based teleworkers can securely access the office network through remote VPN tunnels.
Page 8
Also, it is convenient to set up WHG801 to offer wireless Internet service at large events, such as conventions, trade shows, and student spring break gatherings.
Page 9
【WHG801 in a Hotel – Capable of integrating with DSLAM and PMS】 In summary, the feature-rich WHG801 supports multiple business models of Internet Access Services - be it for managing wireless or wired clients. It can be configured to fit for private corporations, government agencies, academic campuses, multi-tenant units (MTU), hotels, WISP or telco’s hotspot operations.
Page 12
IP address automatically from the LAN port; (2) The IP address and the default gateway are not under the same network segment. Please use default IP address such as 192.168.1.xx in your network and then try it again. For the configuration on PC, please refer to WHG801 User’s Manual. ⑨...
Secure WLAN Controller ENGLISH Common Settings < Setup Wizard > WHG801 provides a Setup Wizard for quick configuration. To quickly configure WHG801 by using the Setup Wizard, click on the Setup Wizard button on the top right corner to start the configuration process.
Page 14
Username (e.g. testuser), Password (e.g. testuser), MAC Address (optional, to specify the valid MAC address of this user) and assign an Applied Group to this particular Please do NOT interrupt WHG801 restart process user (or use the default None). Click Next to continue.
Page 15
Congratulations! The Login Successful page appearing First, connect a client device (e.g. laptop, PC) to means WHG801 has been installed and one of the LAN Ports. The client device must be set configured successfully. Now, you are to use DHCP in TCP/IP configuration to obtain an connected to the network and Internet! IP address automatically.
Page 16
WHG801 Secure WLAN Controller ENGLISH < Service Zone & AP Management > 4ipnet WHG801 has introduced an important new concept called “Service Zone”. For how to set up Service Zones, please refer to Service Zone, WHG801 User’s Manual. For how to set up the “AP Management” feature, please refer to the AP Management, WHG801 User’s Manual.