Beko WM 5140 S User Manual page 31

Detergent may have been
put in wet dispenser
drawer.
Detergent may have
gotten damp.
Detergent
Water pressure might be
residue in the
low
dispensing
The detergent in the main
drawer.
wash compartment might
have gotten wet while
taking in the prewash
water..
Detergent might be mixed
with the bleaching agent.
Excessive laundry might
have been loaded in.
There is Wrong program and
detergent left temperature might have
on the laundry. been selected.
Wrong detergent may
have been used.
You may not be using
proper detergent for
automatic washing
machines.
Excessive amount of
detergent may have been
used.
Too much detergent
may have been used for
a small amount of lightly
soiled laundry.
Detergent may have been
stored improperly.
There is too
Type of material being
much foam.
washed (lace items will
cause excessive foam due
to their meshed structure).
Detergent might have
been put in the wrong
compartment.
Softener being released
early.
Dry the detergent drawer before putting in
detergent.
Store detergent in a closed and dry place. Do
not keep them under high temperatures.
The detergent dispenser outlet (holes) may have
a problem.
There might be problems with the detergent
dispenser valves.
Softener should not come into contact with
detergent when being added.
Do not load the machine in excess.
Select the proper program and temperature for
the laundry to be washed.
Use wool detergents for woolens.
Use only automatic washing machine
detergents in your washing machine.
Use only sufficient amount of detergent.
Use only sufficient amount of detergent.
Store detergent in a closed and dry location. Do
not store in excessively hot places.
Use smaller amounts of detergent for lace
items.
If you put detergent in the prewash
compartment although you have not selected
a prewash cycle, the machine can take this
detergent during rinsing or softener step.
You may have added too much softener.
The detergent dispenser might be problematic.
Water may be siphoned (pulling the softener
into the washer early) during the fill or rinse
cycles.
There might be problems with the valves.
31
EN