Table of Contents
Advertisement
Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions
before starting the program.
C Auxiliary function buttons may differ
according to the model of your
machine.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and
the last auxiliary function selection will
remain active.
For example: If you want to select pre-
wash first and then quick wash, pre-
wash will be cancelled and quick wash
will remain active.
Auxiliary function that is not compatible
with the program cannot be selected.
(see "Program Selection Table")
Pre-wash
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you
save energy, water, detergent and time.
C Pre-wash without detergent is
recommended for lace and curtains.
Less detergent should be put in the
main wash compartment as loose
knit fabrics (lace) foam too much
due to its meshed structure.
Time Save
This function can be used for cottons
and synthetics programs. It decreases
the washing times for lightly soiled
laundries and also the number of rinsing
steps. Shortens the program time
approximately 45 minutes.
Extra rinse
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins' risk of being affected by
the remainder detergent on the clothes
will be decreased.
Rinse hold
If you do not want to unload your
clothes immediately after the cotton,
synthetics, woolen and delicate fabrics
program, you may release your clothes
inside the machine in the last rinsing
water by pressing the rinse hold button
in order to prevent your clothes become
wrinkled. You can spin by pressing
"Start/Pause/Cancel" button after this
process.
Anti-creasing
This function reduces drum movement
and limits the spinning speed to prevent
creasing. In addition, washing is carried
out at a higher water level.
C Use this function for delicate
laundries that crease easily.
C Whenever you select this auxiliary
function, load your machine with half
of the maximum laundry specified in
the program table.
Reducing Speed
You may use the speed reduction
button whenever you wish to spin
your clothes below the maximum spin
speed. When speed reduction button
is pressed, spin speed will be at the
minimum rpm given on the panel.
No spin
You may use this program if you do not
want to spin your clothes at the end of
cottons, synthetics, woolen or delicate
programs.
Time delay
Applies for models with time delay function
If you wish to wash your clothes at a
later time, with the time delay function
you can delay the program start up 3
hours, 6 hours or 9 hours.
1. Open the loading door, place the
laundry inside and fill detergent
drawer.
2. Set the washing program,
temperature, spin speed and, if
required, the auxiliary functions.
3. When the time delaying button is
pressed once, a 3 hour delay is
selected and the relevant led lights.
When the same button is pressed
again, 6 hours; and if pressed
once more, 9 hours delay will be
selected. If the time delaying button
is pressed one more time, time
delaying function will be cancelled.
19
EN
Hide quick links:
Advertisement
Table of Contents
