System Connections - Sharp MD-E9000H Operation Manual

System Connections

AM loop aerial
Right
speaker
Web-site: www.sharp.co.uk/support
10
*MD9000H-E10-11 10
FM aerial
Left speaker
Wall socket
(AC 230 V, 50 Hz)
Help Line: 08705 274277 (office hours)
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position it in the direction
where the strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM LOOP socket. Position the AM loop aerial
for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand
or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling > < Attaching to the wall >
Wall
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
Note:
When an external FM aerial is used, disconnect the supplied FM aerial wire from the
FM 75 OHMS socket.
Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power
lead to the AC INPUT socket, then into the wall socket.
Notes:
Unplug the unit if it will not be used for a prolonged period of time.
Use only the supplied power lead. Otherwise, a malfunction or an accident may occur.
2001.4.20, 2:02 AM
Screws (not supplied)
External FM aerial