Light Cover Install For Gdm-10F & Gdm-12F; Contour Bottle Handle Installation - True GDM-49 Installation Manual

True Food Service Equipment, Inc.
Light Cover Installation for GDM-10F & GDM-12F
- IMPORTANT -
Before installing lamp cover turn
cabinet on and allow it to reach
temperature.
___________ STEP 1 ____________
___________ STEP 2 ____________

Contour Bottle Handle Installation

(Specific Accounts Only)
REQUIRED TOOLS
CAUTION
Do NOT remove the gaskets on radi-
us front, ("RF"), coolers.
___________ STEP 1 ____________
___________ STEP 2 ____________
___________ STEP 3 ____________
17
INSTALLATION / OPERATION INSTRUCTIONS
___________ STEP 3 ____________
If cabinet is turned off and
interior allowed to warm up lamp
cover may become loose and
require reinstallation. Follow
1
___________ STEP 4 ____________
............ www.truemfg.com ............
- NOTE -
directions above.
Rubber
Gasket
- NOTE -
2
3
Lamp
Holder
___________ STEP 5 ____________
Lamp Cover
17