Detergent may have been
put in wet dispenser
drawer.
Detergent may have
gotten damp.
Water pressure might be
Detergent
low
residue in the
dispensing
The detergent in the main
drawer.
wash compartment might
have gotten wet while
taking in the prewash
water..
Detergent might be
mixed with the bleaching
agent.
Excessive laundry might
have been loaded in.
There is
Wrong program and
detergent
temperature might have
left on the
been selected.
laundry.
Wrong detergent may
have been used.
You may not be using
proper detergent for
automatic washing
machines.
Excessive amount of
detergent may have been
used.
Too much detergent
may have been used for
a small amount of lightly
soiled laundry.
Detergent may have been
stored improperly.
Type of material being
There is too
washed (lace items will
much foam.
cause excessive foam
due to their meshed
structure).
Detergent might have
been put in the wrong
compartment.
Softener being released
early.
Dry the detergent drawer before putting in
detergent.
Store detergent in a closed and dry place. Do not
keep them under high temperatures.
The detergent dispenser outlet (holes) may have
a problem.
There might be problems with the detergent
dispenser valves.
Softener should not come into contact with
detergent when being added.
Do not load the machine in excess.
Select the proper program and temperature for
the laundry to be washed.
Use wool detergents for woolens.
Use only automatic washing machine detergents
in your washing machine.
Use only sufficient amount of detergent.
Use only sufficient amount of detergent.
Store detergent in a closed and dry location. Do
not store in excessively hot places.
Use smaller amounts of detergent for lace items.
If you put detergent in the prewash compartment
although you have not selected a prewash cycle,
the machine can take this detergent during
rinsing or softener step.
You may have added too much softener.
The detergent dispenser might be problematic.
Water may be siphoned (pulling the softener into
the washer early) during the fill or rinse cycles.
There might be problems with the valves.
33
TR