Projecting A Reversed Image - Sharp XG-P610X Operation Manual

Projecting a Reversed Image

Projection from behind the Screen
■ Place a translucent screen between the projector and the audience.
■ Reverse the image by selecting "Rear" in the "PRJ Mode" menu. (See page 62.)
Audience
Projection Using a Mirror
■ Place a mirror (normal flat type) in front of the lens.
■ When the translucent screen is placed between the mirror and audience, select "Front" in the "PRJ Mode"
menu. (See page 62.)
■ When the mirror is placed on the audience side, select "Rear" in the "PRJ Mode" menu. (See page 62.)
Set to "Front"
Audience
Info
• When using a mirror, ensure that both the projector and the mirror are carefully placed so the projected
light does not shine into the eyes of the audience.
Ceiling-mount Setup
■ It is recommended that you use the optional Sharp ceiling-mount
adaptor and unit for this installation.
Before mounting the projector, contact your nearest Sharp Au-
thorized Projector Dealer or Service Center to obtain the recom-
mended ceiling-mount adaptor and unit (sold separately).
■ Invert the image by selecting "Ceiling + Front" in "PRJ Mode".
See page 62 for use of this function.
Mirror
Translucent screen
Translucent screen
Set to "Rear"
Audience
Mirror
-23