Table of Contents
Advertisement
3. Push the release buttons on the battery and pull the
battery out.
To use the product
WARNING: Do not stay directly below a
branch that is being cut. This can result in
death or injury.
•
Be careful when you operate near overhead power
lines. Falling branches can result in short-circuiting.
•
If possible, position yourself so that you can make
the cut at right angles to the branch.
•
Cut large branches in sections. Note that falling
branches can bounce in the direction of the user
after hitting the ground.
•
Never cut through the swelling at the root of the
branch as this will slow down healing and increase
the risk of fungal attack!
14
90°
•
Use the stop at the base of the cutting head to
provide support during cutting. This will help prevent
the cutting attachment from "jumping" on the branch.
•
Make an initial cut on the underside of the branch
before cutting through the branch. This will prevent
tearing of the bark, which could lead to slow healing
and cause permanent damage to the tree. The cut
should not be deeper than 1/3 of the branch
thickness to prevent jamming. Keep the chain
running while you withdraw the cutting attachment
from the branch to prevent it jamming.
•
Make sure you have a firm footing and that you can
work without being hampered by branches, stones
and trees.
WARNING: Never activate the power
trigger without having the cutting
attachment in full view.
783 - 002 -
Hide quick links:
Advertisement
Table of Contents
