Download Print this page

Samsung SP-L300 Owner's Instructions Manual page 34

Sharp projector user manual
Hide thumbs Also See for SP-L300:

Advertisement

To clean the exterior and lens of the projector
Clean the projector using a soft dry cloth.
Do not clean the projector with flammable
substances such as benzene, thinners or a wet
cloth, as these may cause problems.
Do not touch the projector with a nail or any other
sharp objects, as this may scratch the surface.
To clean the interior of the projector
For cleaning the interior of the projector,
ask your Service Center or a distributor.
Contact your distributor or a Service Center if dust
or other substances are inside the projector.
Lamp Replacement
Cautions on Lamp Replacement
The projector lamp is an expendable item. For best operating performance, replace the lamp according to the usage
time. You can view the lamp usage time in the Information Display (INFO button).
Use the recommended lamp when replacing. Replace the lamp with the one specified below.
- Lamp Model Name : 220W UHP E19.5
- Lamp Manufacture : Philips
- For inquiries on lamp purchase, please refer to
Check that the power cord is unplugged before replacing the lamp.
Since the lamp is a high temperature and high voltage product, wait at least one hour from the time that the power
cord is disconnected before replacing it.
The lamp is located on the left side of the projector (when looking from the front).
Do not leave the old lamp near inflammables or in reach of children. There is a danger of burn or injury.
Remove dirts or foreign materials around or inside the lamp unit using a proper vacuum device.
When handling the lamp, avoid touching any part of it except for the handles. If you handle the lamp incorrectly, it
may affect the screen quality and shorten its lifetime.
Before you turn the projector over to change the lamp, cover the projector with a soft cloth on a flat surface.
The projector has been designed so that the projector does not work if the lamp cover is not completely assembled
after a lamp replacement. If the projector does not work properly,
indicator LED.
|
|
Care and Maintenance
Contact SAMSUNG WORLDWIDE
'Contact SAMSUNG
WORLDWIDE'.
please check the operating status of the
|
|
Authority

Advertisement

loading

This manual is also suitable for:

Sp-l300w