Samsung SP-L300 Owner's Instructions Manual page 27

▶ Presentation and Text modes are only enabled if the input signal is a
Sub/HDMI)signal.
2) Contrast : Used to adjust the contrast between the object and the background.
3) Brightness : Used to adjust brightness of the entire picture.
4) Sharpness : Used to adjust the sharpness of the picture.
▶ When the input signal is
be adjusted.
5) Color : Used to adjust color lighter or darker.
▶ When the input signal is
adjusted.
6) Tint : Used to obtain more natural color of objects using Green or Red
enhancement.
▶ When the input signal is
the [S-Video] and [AV] modes, the color cannot be adjusted.
7) Color Temperature : You can select the color temperature according to your
preferences.
- Factory defaults: 5500K, 6500K, 8000K, 9300K
- You can select the color temperature for the items below according to your
preferences.
R-Gain, G-Gain, B-Gain : Adjusts the color temperature of the White level.
R-Offset, G-Offset, B-Offset : Adjusts the color temperature of the Black level.
1) Color Temperature
2) R-Gain
3) G-Gain
4) B-Gain
8) Gamma : Changes the brightness characteristic for each color tone of an image.
- The larger (+) the value, the greater the contrast of the bright and dark parts;
the smaller (-) the value, the darker the dark parts.
- Adjustable range: -3 to +3
9) Save :You can save the status of a screen you adjusted according to your
preferences using the
10) Reset : Restores the mode settings to the factory defaults.
Size You can select a screen size according to the type of scene.
▶ When the input signal is
1) Normal
2) Zoom1
3) Zoom2
4) 16:9
Position Adjust the screen position if it is not aligned.
Digital NR When a dotted line is displayed or the screen shakes, you can view a better visual
quality picture by enabling Noise Reduction.
▶ When the input signal is
Black Level You can select the signal black level according to the input signal. If it is unsuitable for
the input signal, the dark parts may not be shown clearly or may be shown dimly.
▶ The Black Level can only be set for [AV],[S-Video], the 480i and 576i signals of
Timing(D-Sub), and the RGB signal of the [HDMI] mode.
- For [AV],[S-Video] and the 480i and 576i signals of
1) 0 IRE : Sets the black level to 0 IRE
2) 7.5 IRE : Sets the black level to 7.5 IRE
- For the RGB signal of [HDMI] mode
PC Timing(D-Sub/HDMI), the Sharpness cannot
PC Timing(D-Sub/HDMI), the Color cannot be
PC Timing(D-Sub/HDMI)and PAL and SECAM of
5) R-Offset
6) G-Offset
7) B-Offset
Mode > User OSD.
PC Timing(D-Sub/HDMI), Zoom1/Zoom2 is not supported.
PC Timing(D-Sub/HDMI)), Digital NR does not operate.
PC Timing(D-
AV
AV Timing(D-Sub).
Contrast
Brightness
Sharpness
Color
Tint
Color
Temperature
R-Gain
G-Gain
B-Gain
R-Offset
G-Offset
B-Offset
Gamma
Save
Reset