66
PROGRAMMING MODE - TEST MODE
2. Factory reset -
After factory reset, machine information is changed to the default value.
Entering set up
mode.
You will see LqC1
NOTE
• Washing time
• Rinse cycle
• Top spin speed
• Price setting varies by country
• Set your country from
• After EEPT, reset your country (Default country is EUK)
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) button until
the display.
Press the Start button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the 90°C (194°F) button twice.
31 minutes
twice
1150 RPM
mode (Refer How to enter the
Button
appears in
Display
)