62
PROGRAMMING MODE - SETUP MODE
29. How to set auto dosing
can be used to set the duration of auto dosage for each channel.
Enter setup mode.
You will see LqC1
CH
Detergent
Pre-wash
➀
Main wash
➁
Bleach
➂
Softener
➃
NOTE
• CH5 is not used in this machine.
Press the 90°C (194°F) button.
Press the 90°C (194°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 90°C (194°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Display auto dosing channel (CH1~5).
Press the Start button.
Display previous dosing time (sec).
Press 90°C (194°F) or 60°C (140°F) button to select time
between 0 and 20 (Except CH3)
CH3 can select time between 0 and 10.
Press the Start button.
Display next auto dosing channel. (until CH5)
The machine sets up the dosing time.
Press the 90°C (194°F) button,
then press the 60°C (140°F) button to advance to the
next process.
Input period
Pre-wash phase
Main wash phase
Main wash (Remaining washing time : 5
Minutes)
Final rinse phase
Button
Display
➀
➃
➁
➂