Connections; Connecting Video Equipment - Sharp PG-M10X Operation Manual

Connections

Connecting video equipment

You can connect up to two pieces of video equipment to the unit following the illustrations below.
• You can switch the input source (picture) to VIDEO or S-VIDEO when you connect two pieces of equipment.
(The S-VIDEO connection provides more vivid color and higher resolution compared to the VIDEO connection.)
• You can output the sound of only one component through the unit's speaker even when two components are connected.
When connecting two external devices, the audio from either one of these devices can be output from the speaker of this
unit. Audio can be turned on and off for video related input (video, S-video) from the menu or COMPUTER input terminal.
(see page 31)
Connection to the VIDEO input terminal of the unit
Audio cable (accessory)
Audio adaptor (accessory)
Rear panel terminals of this unit
Connection to the S-VIDEO input terminal of the unit
Audio cable (accessory)
Audio adaptor (accessory)
Rear panel terminals of this unit
Video deck/DVD player/laser disk, etc.
(L) (R)
White Red
AUDIO MOUSE COMPUTER S-VIDEO
Video deck/DVD player/laser disk, etc.
(L) (R)
White Red Yellow
AUDIO MOUSE COMPUTER S-VIDEO
Yellow
To video output terminal
To audio output terminals
Video cable (accessory)
VIDEO
To S-video output terminal
To audio output terminals
S-video cable (accessory)
VIDEO
15