Speaker Setting; Audio Output Type Setting; Reversing/Inverting Projected Images; Fan Mode Setting - Sharp Notevision XG-C465X Operation Manual

Helpful Functions Set during Installation ("Options2" menu)
2 2

2 Speaker Setting

2 2
This function allows you to set the audio output
of the internal speaker to "On" or "Off" such as
when the projector is connected to an external
amplifier.
Selectable items
On The audio signal is output from the internal
speaker.
Off The audio signal is not output from the
internal speaker.

3 Audio Output Type Setting

3 3 3 3
This function determines whether the audio level
output from the AUDIO output (MONITOR output)
terminal is fixed or variable by linking with VOL-
UME.
Selectable items
FAO Audio output that does not vary in
(Fixed Audio strength with the volume level of the
Output)
source projector.
VAO Audio output that varies in strength with
(Variable the volume level of the source projector.
Audio Output)
Info
• When "Audio Out" has been set to "VAO", first make
sure to lower the volume of the projector before
turning the power on or off and when switching the
input.
4 4 Reversing/Inverting Pro- 4
4 4
jected Images
This projector is equipped with a reverse/invert
image function that allows you to reverse or in-
vert the projected image for various applications.
Selectable items
Normal image (Projected from the front
Front
of the screen)
Inverted image (Projected from the
Ceiling + Front
front of the screen with an inverted
projector)
Reversed image (Projected from the
Rear
rear of the screen or with a mirror)
Reversed and inverted image (Pro-
Ceiling + Rear
jected with a mirror)
Note
• This function is used for the reversed image and
ceiling-mount setups. (See page 19.)
-52
Description
Description
Description
5

5 Fan Mode Setting

5
5 5
This function changes the fan rotation speed.
Selectable items
Normal Suitable for normal environments.
High Select this when using the projector at
altitudes of approximately 1,500 meters
(4,900 feet) or more.
When "Fan Mode" is set to "High", the fan rotation
speeds up, and the fan noise becomes louder.

6 Monitor Output

6 6
6 6

7 LAN/RS232C

7 7
7 7
When set to "Enable", the function is activated
and power is consumed even in the standby mode.
It is recommended that the function be set to "Dis-
able" when it is not connected. This reduces power
consumption when the projector is in the standby
mode.
Selectable items
Enable The function is activated even if the
projector is in standby mode.
Disable The function is switched off when the
projector is in standby mode.
Note
• When you want to control the projector using
the LAN/RS232C function, select "Enable".
8 8 Selecting the Transmis- 8
8 8
sion Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
Selectable items
9600 bps
Transmission speed is slow.
38400 bps
115200 bps
Transmission speed is rapid.
Note
• Refer to the "SETUP MANUAL" contained on
the supplied CD-ROM for RS-232C Specifica-
tions and Command Settings.
• Refer to the computer's operation manual for
instructions for setting the computer's baud rate.
Menu operation Page
Description
Description
Description
42