Rs-232C Specifications And Commands - Sharp Notevision XG-C465X Operation Manual

Projector (Rear View)
Terminals
COMPUTER/COMPONENT 2 input terminal
Terminal for Computer RGB and Component signals.
AUDIO input terminal
Audio input terminal for
COMPUTER/COMPONENT 1.
23·25
COMPUTER/COMPONENT 1
input terminal
Terminal for Computer RGB
and Component signals.
S-VIDEO input terminal
VIDEO input terminal
AUDIO input terminal
for S-video
AUDIO input terminal
for Video
MONITOR output terminal
Output terminal for Computer RGB and
Shared for COMPUTER/COMPONENT 1 and 2.
Carrying handle
55
Intake vent
* Kensington Security
Standard connector
* Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
23·25
23·25
26
26
26
26
28
Component signals.
Using the Carrying Handle
When transporting the projector, carry it by the carrying handle on the side.
• Always put on the lens cap to prevent damage to the lens when transporting the
projector.
• Do not lift or carry the projector by the lens or the lens cap as this may damage
the lens.
25
AUDIO input terminal
Shared audio input terminal for COMPUTER/COMPONENT 2 and
DVI-D.
24·25
DVI-D input terminal
Terminal for DVI Digital RGB and Digital Component
signals.
39
USB terminal
Terminal connecting with the USB terminal on the
computer for using the supplied remote control as the
computer mouse.
29
AUDIO output terminal
30
AC socket
Connect the supplied power cord.
28
LAN terminal
Terminal for controlling the
projector using a computer
via network.
14
WIRED REMOTE terminal
For connecting the remote control
to the projector when the signals
from the remote control cannot
reach the remote control sensor.
27
RS-232C terminal
Terminal for controlling the
projector using a computer.
15
Remote control
sensor
55
Exhaust vent
-13