Switching The Input Mode - Sharp Notevision XG-C465X Operation Manual

Image Projection
Switching the INPUT
Mode
Select the appropriate input mode for the con-
nected equipment.
On the remote control
Press , ,
remote control to select the input mode.
On the projector
1 1
1 1 Press an INPUT (' 1
• The INPUT list appears.
2 2 ' ' ' ' /" " " " " to select an item on
2 Press ' 2 2
the list.
3 Press 3 3
3 3
ENTER.
Note
• When no signal is received, "NO SIGNAL"
will be displayed. When a signal that the
projector is not preset to receive is received,
"NOT REG." will be displayed.
About the INPUT mode
COMPUTER/ Used for projecting images
COMPONENT from equipment that sends
1, 2 RGB signals or Component
signals connected to the RGB
input terminal.
DVI-D Used for projecting images
from equipment that sends DVI
Digital RGB and Digital Com-
ponent signals connected to
the DVI-D input terminal.
S-VIDEO Used for projecting images
from equipment connected to
the S-VIDEO input terminal.
VIDEO Used for projecting images
from equipment connected to
the VIDEO input terminal.
-34
, or on the
' ' /" ' ' " " ) button. " "
INPUT buttons
"On-screen Display of INPUT list
INPUT
1 COMPUTER 1
2 COMPUTER 2
DVI
D
S S-VIDEO
VIDEO
V
SEL. ENTER
"On-screen Display of INPUT Mode (Example)
COMPUTER/
COMPONENT 1, 2
mode
DVI-D mode
S-VIDEO mode
VIDEO mode
/ / / /
Using RGB
1 COMPUTER 1
RGB
1024 × 768
Using Component
1 COMPUTER 1
Component
720P/750P
DVI
D
D. PC RGB
1024 × 768
S-VIDEO
S
VIDEO
V