Philips 220B4LPCS/00 Service Manual page 60

Meridian 3
60
5. Color Temp confirmation
Connect the signal to the monitor, the monitor displays white-picture, use CA-210 to measure the Color Temp of the
screen center and select the OSD to make sure whether the Color Temps accord with the SPEC.
CIE coordinates
6. How to enter into the factory mode:
1. Connect the video source and power off the monitor.
2. Press and
picture will appear on the top left corner.
3. Select the "Factory" and press the "MENU" button to enter the factory mode.
9300K
x 0.283±0.02
y 0.297±0.02
buttons at the same time, power on the monitor, and then press the menu again; the
6500K/sRGB
0.313±0.02 0.313±0.02
0.329±0.02 0.329±0.02
sRGB