Philips 220B4LPCS/00 Service Manual page 4

Meridian 3
4
IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended.
Always activate a periodic screen refresh application if your monitor will display unchanging static content.
Uninterrupted display of still or static images over an extended period may cause "burn in", also known as
"after-imaging" or "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a
well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "after-imaging" or "ghost
imaging" will disappear gradually over a period of time after the power has been switched off.
Warning
Severe" burn-in" or "after-image" or "ghost image" symptoms will not disappear and cannot be repaired. The
damage mentioned above is not covered under your warranty.
Service
The casing cover should be opened only by qualified service personnel.
If there is any need for any document for repair or integration, please contact with your local service center.
(Please refer to the chapter of "Consumer Information Center")
For transportation information, please refer to "Technical Specifications".
Do not leave your monitor in a car/trunk under direct sun light.
Note
Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take
when the operating instructions given in this manual have been followed.