Operating Precautions - Rocktron Velocity 300 Instruction Manual

5. Operating Precautions

Although operation of the Velocity 300 is simple once the proper connections have been made,
attention to the following precautions is essential to protect your equipment against failure and
ensure the long life of your Velocity® amplifier.
Power Output/Speaker Load
The Velocity 300 is capable of producing the following power output levels into each of these
loads:
! Always be certain to use speakers or speaker cabinets capable
of withstanding the power provided in the above mentioned
applications. Rocktron is not responsible for speaker failure
resulting from use of this equipment.
! Never connect 2 outputs of the amplifier to the same speaker.
This would be equivalent to shorting the outputs of the amplifier
together and would shut the unit down immediately.
Unbridged (Stereo)
4 ohm load 150 watts
8 ohm load 75 watts
16 ohm load 37.5 watts (with both channels driven)
Bridged (Mono)
4 ohm load Not Recommended*
8 ohm load 300 watts
16 ohm load 170 watts
9