Advertisement
Notification LED
SNyomtifibcoalstionLEDs
The notification LED provides information about the status of the power supply, battery and other
notifications in the chart below.
Notification LED
Status
Action
Hold the power
button down (at
Power on
least 3-5
seconds)
Hold the power
Power off
button down (5 to
9 seconds)
Press the power
Remaining battery
button for 1
check
second
Charging
－
Charging error
Hold the power
Pairing
button down (3 to
4 seconds)
Fujitsu
Displays
Description
Flashes green
Powered on
twice
Flashes green
If the battery is too low, the device will
twice, then
automatically turn off. Be sure to charge it
flashes red
before use
once
Flashes green 3
Powered off
times
Flashes green 3
There is enough battery power left.
times
Flashes red 3
The battery is very low (less than 20%). Be
times
sure to charge it before use
Stays lit while charging, then the LED turns
Stays lit red
off when charging is complete.
Flashes red
There is a charging error or hardware failure
Flashes green
Waiting for pairing. Once pairing is complete
for a maximum
the LED will stay on for 3 seconds
of 30 seconds
Pairing successful
Green for 3
seconds
Using the device
13
Advertisement
